Bioscreen Inc.
889 Broadway
New York NY 10003
T: 212.260.6692








Material Safety Data Sheet


Bioscreen Inc. supplies Material Safety Data Sheets for products you have purchased.  All information is offered gratuitously and in good faith as accurate, but is furnished without guaranty.  No claim is made that the information is all-inclusive, and it should be used only as a guide.  Bioscreen shall not be held liable for any damage resulting from handling or from contact with the product.  This information is for internal use only.  

Prepared 7/31/94

Section I:  Product Identification

Sperm Antibody Positive Serum

Section II:  Hazardous Ingredients

Component                                   Weight Percent                        CAS Number
    Serum                                             <100                                             NA
    Sodium Azide                                 <1                                            26628-22-8

Section III:  Physical Data

Appearance and Odor:  Liquid; odorless
Boiling Point:  >100oC
Vapor Pressure:  NA
Vapor Density:  about 0.6
Solubility in Water:  Complete
Specific Gravity:  NA
Evaporation Rate:  NA
Volatile Fraction by Weight:  about 98%









Section IV:  Fire and Explosion Hazard Data

Flash Point:  None, noncombustible
Extinguishing Media: Not applicable.
Special Fire Fighting Procedures:  Not applicable.
Unusual Fire and Explosion Hazards:  None        

Section V:  Reactivity Data

Stability:  Stable
Incompatibilities:  None
Hazardous Polymerization: None

Section VI:  Health Hazard Data

Effects of Overexposure:  Not established
Inhalation: No specific hazard known.
Eyes:  No specific hazard known.  May cause transient irritation.
Skin:  No specific hazard known.
Ingestion:  Expected to be a low ingestion hazard.

First Aid Procedures:
    Inhalation:  If symptomatic, remove to fresh air. Get medical attention if symptoms persist.
    Eyes:  Any material that contacts the eye should be washed out immediately with water.  Get medical attention if symptoms occur.
    Skin:  Wash after each contact.  Get medical attention if symptoms occur.
    Ingestion:  Drink 1 - 2 glasses of water.  Seek immediate medical     attention.

Section VII:  Precautions for Safe Handling and Use

Ventilation:  Good ventilation (typically 10 air changes per hour) should be used.
Eye/Skin Protection:  Good industrial hygiene practice should be     followed which includes preventing eye contact and minimizing skin contact and inhalation.  Safety glasses with side shields are recommended in industrial operations involving chemicals.  If prolonged or repeated skin contact is necessary, impervious gloves or other protection may be required.
Spill, Leak and Disposal Procedures:  Discharge, treatment, or disposal may be subject to national, state, or local laws.  Flush to sewer with large amounts of water.

Bioscreen Inc.
889 Broadway
New York NY 10003
T: 212.260.6692
F: 212.505.8283






Material Safety Data Sheet


Bioscreen Inc. supplies Material Safety Data Sheets for products you have purchased.  All information is offered gratuitously and in good faith as accurate, but is furnished without guaranty.  No claim is made that the information is all-inclusive, and it should be used only as a guide.  Bioscreen shall not be held liable for any damage resulting from handling or from contact with the product.  This information is for internal use only.  

Prepared 7/31/94

Section I:  Product Identification

Sperm Antibody Negative Serum

Section II:  Hazardous Ingredients

    Component                                           Weight Percent            CAS Number
    Serum                                                         <100                                NA
    Sodium Azide                                               <1                          26628-22-8

Section III:  Physical Data

Appearance and Odor:  Liquid; odorless
Boiling Point:  >100oC
Vapor Pressure:  NA
Vapor Density:  about 0.6
Solubility in Water:  Complete
Specific Gravity:  NA
Evaporation Rate:  NA
Volatile Fraction by Weight:  about 98%







Section IV:  Fire and Explosion Hazard Data

Flash Point:  None, noncombustible
Extinguishing Media: Not applicable.
Special Fire Fighting Procedures:  Not applicable.
Unusual Fire and Explosion Hazards:  None        

Section V:  Reactivity Data

Stability:  Stable
Incompatibilities:  None
Hazardous Polymerization: None

Section VI:  Health Hazard Data

Effects of Overexposure:  Not established
Inhalation: No specific hazard known.
Eyes:  No specific hazard known.  May cause transient irritation.
Skin:  No specific hazard known.
Ingestion:  Expected to be a low ingestion hazard.

First Aid Procedures:
    Inhalation:  If symptomatic, remove to fresh air. Get medical attention if symptoms persist.
    Eyes:  Any material that contacts the eye should be washed out immediately with water.  Get medical attention if symptoms occur.
    Skin:  Wash after each contact.  Get medical attention if symptoms occur.
    Ingestion:  Drink 1 - 2 glasses of water.  Seek immediate medical     attention.

Section VII:  Precautions for Safe Handling and Use

Ventilation:  Good ventilation (typically 10 air changes per hour) should be used.
Eye/Skin Protection:  Good industrial hygiene practice should be     followed which includes preventing eye contact and minimizing skin contact and inhalation.  Safety glasses with side shields are recommended in industrial operations involving chemicals.  If prolonged or repeated skin contact is necessary, impervious gloves or other protection may be required.
Spill, Leak and Disposal Procedures:  Discharge, treatment, or disposal may be subject to national, state, or local laws.  Flush to sewer with large amounts of water.

Home